These are excellent, US made guitars and it's obvious the owner has certainly poured some mojo into this particular one. The finish was removed to reveal the solid Mahogany body, and the stock pickups have been replaced with a Seymour Duncan JB in the bridge and two vintage Strat style singles in the middle and neck.
Sanding the finish resulted in making the area by the switch plate quite thin and frail. This will need some reinforcement that will involve some custom work.
The initial concern with this guitar was the wiring that was done when the pickups were replaced. While it did work, it wasn't to the standard that the owner would like. There is also a component missing that I believe may have been a toggle switch for coil splitting. Endless options are available to put in that opening, so we'll see what the owner decides...
You can see some left-over red sparkle paint under the control cover, which was misplaced over the years. No problem to cut a new one to shape, but the concern now is that the sanding of the body has resulted in a very shallow recess that is not deep enough for the cover to sit flush. This will be routed down to accommodate the new cover.
This Schaller-made licensed Floyd Rose is in need of a thorough cleaning, as with the rest of the components. This guitar has been dismantled completely for this project so as to breathe new life into it and get it back in to service!
You can see the string spacing on the humbucker is narrower than the bridge. This pickup is for a Gibson style scale. For this type of bridge, a Trembucker is required ~ same pickup but with wider string spacing. Fortunately I have one in stock!
Piece by piece, the tremolo was overhauled and thoroughly cleaned and threads lubricated. I make sure to keep the same saddle graphite clamp blocks (the small cubes) in their original location, as the wound strings tend to make an indent over time. If they were to be mixed up, it's quite possible to be faced with a "sitar" effect buzzing away in an unwound string.
No explanation for this, other than an obvious shortage of shrink tube! This pickup can easily be repaired with a little time and solder, not to mention a good cleaning.
Still lots of playing left in these frets. Once they're dressed and these inconsistencies are removed, it will feel like new!
A common occurrence on well played guitars ~ individual string indents in the first 3-5 frets and then flat crowns in the upper register where string bending is done. These jumbo frets are still tall enough to benefit from dressing.
This fretboard is begging for oil. Buildup of grime will suck a lot of the natural oils out of the wood, making it more susceptible to wear. A cleaning and light coat of lemon oil when changing strings will not only prolong the life of the fretboard, but it will also be a pleasure to play.
Stay tuned!
